Instructions

SolarFast instructions

How to apply SolarFast, make an image, expose your print in the sun and wash it out.

SolarFast dyes are used to create photograms, continuous tone photographs, shadow prints and ombrés on fabric and paper. SolarFast is also great for painting, tie dyeing, screen printing, stamping, batik and more.

Basic instructions

  1. Apply SolarFast to fabric or paper.
  2. Place and secure your image.
  3. Expose to sunlight (or UV light).
  4. Wash, and you're done. Admire your print!

Applying the dye

Apply SolarFast with a brush, sponge or brayer.

  • For hard edges, use masking tape to create a window the size of your image. SolarFast is just thick enough to prevent bleeding: it will not creep under your masked areas, and it can be applied through a stencil. Remove the tape before exposing.
  • For brushed edges, simply brush out the dye beyond the frame of your print.
  • An even coating of dye will produce the best prints. SolarFast prints must be made while the dye is still wet, but you do not want to oversaturate the substrate. If the fabric is too wet during exposure, condensation may form underneath the negative, which can interfere with development. To avoid over-wetting, blot absorbent fabric or paper with a paper towel or rag. Prints made with dry media will not produce the optimum depth of shade.
  • If printing on paper, use heavy artist papers like Arches or Reeves. Apply an even coat: irregularities in the coating will produce irregularities in the resulting print.
  • When printing on T-shirts or garments, place a piece of paper or board between the layers of fabric to avoid bleed-through while applying the dye.
  • SolarFast may also be applied through a spray bottle or airbrush (thin first with water), or through a silk screen (thicken first with SolarFast Thickener).

For more ideas on applying SolarFast, see SolarFast tips and tricks.

Creating an image

SolarFast may be used on its own as a paint, ink or dye for batik, silk painting, screen printing and tie dyeing. It can also make photograms, shadow prints and sun prints. Photographic SolarFast prints are made using a film negative.

  • Photograms: place any object on the coated substrate before exposure. Anything that casts a shadow will produce an image. Flat objects work best. Flat, thin objects such as leaves or keys can be held in place with a piece of glass. Note: pure acrylic sheeting lets UV light through and can be used just like glass, but many types of acrylic, like Plexiglass, have UV blockers that can prevent or reduce exposure.
  • Photographic prints: use a film negative. Negatives can be printed on transparent film with a photocopier, laser printer or inkjet printer. For inkjet printing, we recommend SolarFast Film, which is moisture resistant and specially coated to make the best negatives. Traditional film negatives also work well, as long as they are dense enough.
  • Higher contrast images work best, and high density is key: the blackest areas of a negative should be completely opaque, and the lightest areas transparent.
  • Layer two negatives for extra contrast or if your printer outputs less ink. Carefully register the two films and use tape or glass to keep them in place.
  • Place the negative waterproof side down (print side up) on your coated fabric or paper. Use a piece of glass or acrylic to hold the negative in place and keep it flush with the substrate. You can also pin or tape down your negative, but it must be flush with the substrate for a good print, or you may lose detail.

To turn any photo into a negative, use the Negative Generator. For more creative ideas, see SolarFast tips and tricks and How to print a good negative.

Exposing your print

Expose your coated paper or fabric to sunlight, as directed on the SolarFast label.

  • Different colors need different exposure times, from 10 to 24 minutes depending on the weather, and up to 1 hour for SolarFast Black. Check the dye label or the exposure times for each color.
  • The best time to make prints is the middle of the day, when the sun is directly overhead. Use direct sunlight whenever possible. Prints made earlier or later in the day, or on cloudy days, need longer exposures.
  • You can almost always make a good print between 11am and 3pm. It's just a matter of finding how much time current conditions need.
  • For best results, do a wedge test with the SolarFast step wedge. If your negative is dense enough (the darkest areas are truly opaque), it's better to overexpose than underexpose. You can also watch the color appear, which shows how the exposure is progressing.
  • The final result isn't revealed until you've washed the print.
  • SolarFast develops in UV light. You can use artificial light, but the time needed depends on the bulb's UV output. Test first.

Washing

After exposing, remove the undeveloped dye by washing. Use SolarFast Wash for best results. Color development isn't complete until after washing, and white areas of the print become whiter.

  • Bring the print inside, away from the light, before removing the negative. If needed, store your print in a cool, dark place between exposure and washing.
  • Machine washing is recommended for textiles. Use SolarFast Wash (3 to 4 capfuls, or 24 ml) and the hottest possible cycle.
  • To hand wash paper or fabric, submerge it in the hottest tap water possible, add SolarFast Wash (1 to 2 capfuls, or 10 ml) and keep the water flowing for at least 10 minutes.

Now you're done

Your print is soft to the touch, lightfast and permanent. Have questions? See SolarFast FAQs and troubleshooting.