Guide
How to print a good negative
Your print is only as good as your negative. How to make a dense, crisp negative for SolarFast.
Download the PDFSolarFast dyes create photograms, continuous tone photographs, shadow prints and ombrés on fabric and paper. When making photographic prints from a film negative, remember that the print will only be as good as the negative it's made from, so spend some time at the start getting the best possible negative.
Basic instructions
- To make permanent photographic prints on paper or fabric, use a film negative. Negatives can be printed on transparent film with a photocopier, laser printer or inkjet printer. For inkjet printing, we recommend SolarFast Film, which is moisture resistant and specially coated for the best density. Traditional film negatives also work well, as long as they're dense enough.
- With SolarFast Film, print only on the print side. The print side feels slightly sticky to the touch.
- Layer two negatives for extra contrast or if your printer puts down less ink. Carefully line up the two films and use tape or glass to hold them in place.
- Place the negative waterproof side down (print side up) on your coated fabric or paper. Use glass or acrylic to hold it flush with the surface. Note: pure acrylic sheeting lets UV light through just like glass, but many acrylics, like Plexiglass, have UV blockers that can prevent or reduce exposure. You can also pin or tape down your negative, but it must be flush with the surface for a good print, or you may lose detail.
What makes a good negative
- The darkest areas are completely opaque. Anything you want white on your print must be completely opaque on your negative. Hold your negative up to a light bulb to test it. If light comes through the dark areas, they aren't dark enough (see below). If no light comes through, the negative will give truly white highlights.
- The image is crisp. Sharp images make sharp prints.
For best results
- Double up your negative for more density or contrast if your inkjet printer puts down less ink. Line them up exactly.
- Adjust your printer settings, or run the same film through your printer more than once for a denser negative.
- Use SolarFast Film. It's moisture resistant, the right thickness and specially coated to make the best negatives.
To turn any photo into a print-ready negative, use our Negative Generator.