Troubleshooting
SolarFast FAQs and troubleshooting
Answers to common SolarFast questions, and what to do when prints are pale, dark, blurry or blotchy.
Download the PDFFAQs
Does SolarFast have to be wet to develop, or can I make dry prints?
SolarFast works best if exposed while wet. Exposing prints after the dye has dried gives paler colors in most cases. Some colors work better than others for dry printing: in general, warmer colors (Red, Orange and so on) work best. Always test first, and store coated fabric or paper in a dark place.
How many prints can I get out of 4 oz of SolarFast dye?
Generally, you'll get 1 to 3 prints of 8.5 x 11 inches per ounce of dye, depending on how absorbent the fabric is. On paper the dyes go much further: expect 3 to 6 prints per ounce. For more coverage and better value, dilute SolarFast with water. You can dilute the dyes up to 1:1 without losing much depth of shade.
Can I thicken SolarFast dyes? Can I screen print with it?
Thicken SolarFast to prevent bleeding, for better control or for screen printing. Use 1 tablespoon of SolarFast Thickener per 4 oz of SolarFast dye (see the instructions on the product page). Sodium alginate, Super Clear or other thickeners can also be used. SolarFast is terrific for screen printing: it never dries in the screen, it leaves fabric completely soft and no heat setting is needed. Use it like any other screen ink, or to layer continuous tone images onto your screen prints. Screen printing is also an excellent way to apply SolarFast quickly for production runs.
Can I thin my SolarFast dyes with water?
Yes. This is useful if you want to spray SolarFast through a mister, spray bottle or airbrush, apply the dye by dipping, or simply prefer thinner colors.
Will adding water to SolarFast affect the depth of shade?
Most SolarFast colors can be diluted 1:1 with water without much effect on depth of shade, which is a great way to make your dye go further. Adding more water gives lighter shades, and may also affect exposure times and performance. Always test first.
Can I see the dyes better while I'm working with them?
Add a colorant that won't stain the fabric you're working on. We recommend Pearl Ex or iDye Poly. You can also use food coloring, a small amount of paint or dry pigment.
Can I reuse my negative?
Absolutely. Use your negatives as many times as you like. Just don't scuff or wet the print side of the film. After each print, wipe the waterproof side of the film (the side that touches the dye) with a damp rag or towel. If the dye dries on the film it can be hard to remove; a little alcohol may help.
Can I use artificial light to make SolarFast prints?
SolarFast develops with UV light. The sun is the ultimate source of UV, but many bulbs give off enough UV to make a good print indoors. Exposure units like those in screen printing shops work well, and sun lamps, grow lights and high-energy black lights may also work. Exposure times depend on the bulb's UV output. Always test first.
Do I have to wash my prints immediately, or can I wash a pile of them at once?
We recommend washing prints as soon as you take them out of the sun. Bring prints inside, away from sunlight, before removing your negative. If a print sits too long before washing, you may lose some highlights, and undeveloped dye becomes harder to remove the longer you wait. If you do wait, keep the print somewhere dry and dark, or submerge it in a bucket of water away from light until you're ready to wash.
Can I wash more than one print at a time?
If you're washing several prints at once, or prints of different colors together, hand rinse them first. This helps reduce back staining.
My SolarFast Film looks cloudy instead of clear. Is this normal?
Yes. SolarFast Film is specially coated to make high-density negatives, and the coating makes it look translucent. The cloudy look may increase during exposure as the film meets moisture. No matter how it looks, the film always lets UV light through, and your prints will look great.
What materials can I use with SolarFast?
SolarFast is permanent on any natural fiber, including cotton, linen, hemp, wool, silk, canvas, leather, bamboo and wood. It won't work on synthetic fabrics, plastic, rubber or non-absorbent surfaces such as sealed wood, glass or metal. Because it's a true dye, the same color can look quite different on different fabrics. This is normal for any dye.
Can I make photographic prints on silk?
Yes. SolarFast Wash and hot water are highly recommended. Silk holds onto dye strongly, so undeveloped dye is especially hard to remove from it. Wash thoroughly and test first.
Can I mix SolarFast colors?
All SolarFast colors can be mixed, either before you apply them or directly on the fabric or paper (multi-color prints look great). SolarFast develops its final color in the light, so mixing an exact color can be tricky. For consistent results, measure carefully and test first. For paler shades, dilute with water.
Are SolarFast dyes supposed to be colorless in the bottle?
Each color is different. Most are essentially colorless in the bottle; many are slightly tinted, and some look more opaque or milky. A few colors show color before exposure. This is normal: used properly, that color washes out, leaving white wherever an object or negative blocked the light. The colors that are not colorless in the bottle are Golden Yellow, Green, Teal, Avocado, Sepia and Black. These are yellowish and may need extra care when washing.
Can I print my negative on paper instead of a transparency?
Printer paper usually isn't transparent enough. A good trick: after printing your negative on paper, coat it with vegetable oil or baby oil. This makes the paper transparent while the black areas stay opaque. Don't get your fabric or paper too oily, as this can interfere with development. This is experimental, so test first. Because the paper isn't fully transparent, increase exposure times by at least 15%.
Will SolarFast change the feel of my fabric?
Not at all. SolarFast is a true dye, so your fabric stays completely soft to the touch.
Will my print look different after I wash it?
Often, yes. You won't see your final result until the print has been washed and dried. Highlights usually get brighter (white areas become whiter), especially with Golden Yellow and the other colors that contain yellow. Other colors, such as Blue and Black, aren't fully developed until after washing in hot water: they become bluer or blacker in the wash.
Do all the SolarFast colors behave the same?
Yes and no. Colors need different exposure times and look different in the bottle: some are colorless, some milky, some colored and some transparent (see exposure times and color details). Some colors change after washing while others develop fully during exposure. Apart from that, all SolarFast colors have the same properties.
Does SolarFast Black produce neutral greys and blacks?
SolarFast Black is a blend of several colors, so it can give neutral, warm or cool blacks depending on the surface, exposure time and conditions. Test first so you know what to expect. Black needs much longer exposures than other colors, and in general the longer it's exposed, the more neutral the greys and blacks. For best results, make sure the surface is well wetted with dye before exposing, and expose until the dye is completely dry.
Do I need a negative to make a SolarFast print?
No. SolarFast is great for tie dye, batik, serti and fabric painting: just apply the dye and expose it to sunlight, with no heat setting, chemical or steam fixing needed. You can also use household or natural objects (leaves, tools, string, utensils) to make sun prints and photograms, or make a hand-made negative by drawing or painting on a transparency. There are no rules. Experiment!
How do I clean up SolarFast?
With soap and warm water.
Can I use SolarFast on printed or colored fabric?
SolarFast works on any light-colored natural material, including pre-dyed fabric, patterned fabric and found papers. Because it's a transparent dye, the surface must be lighter than the dye (it won't show on black or dark backgrounds), and colors add together: Golden Yellow on blue fabric gives a green print.
Can I make a SolarFast print on black fabric?
Not without an extra step. SolarFast is transparent, so it won't show on dark or black fabric. First discharge or bleach out an area of the fabric about the size of your print, using Discharge Paste, bleach or Jacquard Discharge/Reduction Agent (Jacquard's Discharge Additive isn't compatible with SolarFast). This creates a light window in the black fabric for SolarFast to show on. Wash out the bleach or discharge chemical before applying SolarFast.
Troubleshooting
What is the shelf life of SolarFast dyes?
Up to two years stored in a cool, dark place. Once opened, the dyes last 6 months. Refrigerating helps them last longer, but don't freeze them. Heat, light and air can shorten shelf life. Over their usable life, the colors won't dull or weaken: they stay bright and intense.
Prints are too light or pale
Your print probably needs more light. Expose in direct sunlight, and expose longer for deeper colors. The best time is between 11am and 3pm, when the sun is high; earlier or later prints may need longer exposures. On cloudy or overcast days, double the exposure time. Overly dense negatives can also give pale prints, so make sure your highlights are truly transparent. If you're using glass or plexi, make sure it doesn't absorb UV (museum glass filters out UV and will cause problems). Dye that's too dry during exposure can also give pale prints, so expose while the dye is still damp.
Prints are too dark
You may be overexposing, or your negative may not be dense enough. Try a shorter exposure, or double your negative for more density and contrast. The darkest areas of your negative should be completely opaque; adjusting your printer settings or running the same film through your printer twice can help. Dark prints can also come from unwanted exposure: don't expose your print to light before placing your negative or after removing it. Always work in subdued light before and after printing.
Light areas are still developing after washing
There's still undeveloped dye in the fabric or paper. Wash in hot water with SolarFast Wash right after printing. In a machine, you may want to run two cycles. By hand, keep your print in hot running water for at least 10 to 15 minutes. If you have hard water, a water softener may help. Wash immediately after exposing: the longer you wait, the harder the undeveloped dye is to remove.
Print looks blurry or detail is disappearing
This is usually a contact problem. The film must be in good contact with the fabric or paper, or you'll get fuzzy lines. Print on a hard, flat surface. A piece of glass keeps the film flush, and clamping the glass to a board behind the fabric or paper adds pressure for the best detail. Blurry prints can also come from shadows: if the sun is low and your print is flat, the negative may cast a shadow. Print when the sun is high, or angle the print to face the sun. Condensation under the negative during exposure can also cause blur, so blot the dye before placing the negative.
Print looks blotchy or mottled
This can happen when the fabric or paper is too wet during exposure: dye sticks to the negative and lifts off, leaving blotches. Don't apply too much dye, and blot if it seems too wet. Condensation between the film and the surface can also cause mottling, which drier coating and flush contact (clamps or clips) both help prevent.
You spill SolarFast or get it where you don't want it
SolarFast isn't permanent until it's developed in UV light. Rinse it out right away with warm water and a little SolarFast Wash or Synthrapol. Or cover the dye with something opaque so it doesn't develop during exposure. This is a great way to deal with drips and fingerprints before it's too late.
Back staining or color migrating during washing
Wash with hot water and SolarFast Wash. Hand rinsing before machine washing removes most of the excess dye and reduces the risk of back staining.
Trouble with Golden Yellow, Green, Teal, Avocado, Sepia and Black
These colors all contain yellow dye, the one SolarFast color that shows color before exposure (they're yellow straight out of the bottle). That makes truly white highlights harder: the yellow can stain and be hard to remove, giving poor contrast or a yellowish tint. Wash with hot water and SolarFast Wash, and consider running two machine cycles. Hand rinse first to remove most of the excess dye and get whiter whites. Wash immediately after exposing. Yellow develops quickly, so don't expose the dye to light before placing your negative or after removing it. Getting the exposure time right matters most with these colors: overexposure gives bluer-than-expected greens, for example, and can reduce contrast.