Guide

SolarFast step wedge instructions

Find the right exposure time for cloudy days or artificial light with a 10-step test print.

Download the PDF

When to use it

  • Using the SolarFast step wedge is completely optional. Most printers will never need it: the exposure times on the SolarFast labels almost always produce great prints on sunny days.
  • Use the step wedge only if you're printing in unusual conditions, such as with artificial light or on an unusually cloudy day.

Note: With artificial light, exposure time depends on the UV output of the bulb, and will likely be much longer than in direct sunlight. Do a step wedge test to find the best exposure time.

What is a step wedge?

  • The SolarFast step wedge is printed through an inkjet printer onto SolarFast Film or another high-quality transparent film. Download the PDF on this page for the step wedge itself.
  • Hold your step wedge up to a light: one end should be completely transparent (step 0) and the other completely opaque (step 10).
  • If step 10 isn't completely opaque, adjust your printer settings to put down more ink, run the film through your printer a second time, or layer two step wedges for more opacity and contrast.
  • The step wedge has 10 steps, from completely opaque to completely transparent, with a 10% difference in optical density (how much UV light passes through) from one step to the next.

How to use the step wedge

  1. Make a SolarFast print using the step wedge, following the SolarFast instructions.
  2. Wash and dry your print before analyzing the results. The perfect exposure gives a print with every step clearly different, from the deepest shade (step 0) to white (step 10).
  • If underexposed, white areas will extend past step 10 on the print. If overexposed, the darkest value will extend past step 0.
  • Each step represents a 10% difference in optical density, and also 10% of the total exposure time. Increase exposure time by 10% per step to separate values at the light end (steps 6 to 10), or decrease it by 10% per step to separate values at the dark end (steps 0 to 4).
  • For example, if steps 9 and 10 look the same, increase the exposure time by 10% (from 10 minutes to 11 minutes). If steps 8 to 10 look the same, increase it by 20%, and so on. If steps 0 and 1 look the same, decrease the exposure time by 10%.
  • If steps 0 to 2 look the same, decrease the exposure time by 20%, and so on. Adjusting your exposure time this way finds the best time quickly. If your darkest value (step 0) looks pale, you may need to increase the overall time. If that doesn't work, see SolarFast FAQs and troubleshooting.

Note: Step wedge tests are used to set exposure times in all kinds of photographic processes, from darkroom photography to screen printing and lithography, and each system has its own challenges. With SolarFast, you may find it hard to separate all 10 values: you may lose lighter values when bringing out darker ones, and the other way around. Each color may also behave differently. This is typical of all photographic systems and is part of how SolarFast works.