Guide
SolarFast tips and tricks
Creative ideas for negatives, multi-color and full-color prints, printing on wood and screen printing with SolarFast.
Download the PDFCreative ideas for negatives
Hand-painted negatives
Instead of a printed negative, paint directly on a transparency and make a print from your design. Make sure whatever you paint with is opaque: Jacquard Airbrush Colors or Neopaque work great. Use a paintbrush, paint pen, applicator, airbrush or silk screen to put the opaque color on clear film.
Layering negatives
Layer two different images and they'll be superimposed on your print. Layer the same image in a different orientation to make symmetrical photographic images.
Altering digital negatives
Change a negative before exposing by drawing or painting on it, or scraping off some of the inkjet ink. Try printing a solid black film and scraping the ink off with a dull tool to make a print of a line drawing (like scratchboard, in reverse).
Combining photos with photograms
Combine negatives with objects for more varied effects. For example, place a ribbon, tools or leaves over your negative.
Cutting up your negatives
Make a collage from negatives and print from the collage. Use clear tape to join parts of different negatives, or place them carefully on your coated surface and hold them in place with glass, tape or pins. You can also cut parts of a negative out or change its edges. Jagged edges look great.
Applying the dye
Multiple colors
Your print doesn't have to be one color. Try applying more than one SolarFast color: stripes, splatters and drips can be beautiful. Use colors with similar exposure times for best results.
Full-color photos from CMYK separations
This is an advanced process, but it's worth it. You can make full-color photographs with SolarFast by printing each process color separately.
- Separate the image into CMYK layers in Photoshop or another design program.
- Make a negative for each layer.
- Coat and expose each color, then wash and dry before printing the next one. Use Blue, Red, Golden Yellow and Black.
The result looks like a full-color photograph (a C-print).
Printing on colored fabric
SolarFast doesn't have to go on white fabric. Try previously dyed or patterned fabric, old clothing or found paper. The background just needs to be lighter than the SolarFast color you're using. Dyes are transparent, so the background color affects the result: yellow on blue fabric gives a green print.
Embellishing a painting
SolarFast doesn't need heat setting, steaming or chemical fixing, just sunlight. That makes it ideal for embellishing or repairing artwork on fabric. Use it to color in a design or add accents, or on top of another SolarFast print to fill in areas or superimpose images.
Embellishing your SolarFast prints
SolarFast doesn't change the feel of fabric at all, so you can always rework a SolarFast print with dyes, paints, pens or inks.
Printing photographs on wood
It just takes a little extra patience. Wood must be uncoated and untreated; pine or another light-colored wood works best.
- Sand off any finish before applying the dye. After exposing, hand wash the wood.
- Use a sponge to gently scrub the surface.
- Use hot water and keep the wood submerged for at least 10 minutes.
Screen printing with SolarFast
SolarFast makes the ultimate screen printing ink: no heat setting, soft to the touch, it doesn't dry in the screen, it's permanent and it cleans up with water. You can also superimpose images and make continuous tone prints.
- Use SolarFast Thickener to bring the dye to the viscosity you want, then print as normal.
- While the print is still wet, expose it to sunlight.
- After exposure, wash in hot water with SolarFast Wash.
To superimpose images, lay a negative on top of the print before exposure, as in the SolarFast instructions. Screen printing is a great way to apply solid blocks of dye without masking or brushing, and to layer imagery onto a pattern.
Coloring SolarFast to see it better
Most SolarFast colors are colorless until exposed, which can make them hard to work with. To see the dye before exposing, add a colorant that won't stain your fabric or paper. We recommend Pearl Ex or iDye Poly, or a small amount of paint or powdered pigment.
General tips
- When printing T-shirts or clothing, put something between the layers of fabric to prevent bleed-through. Board, wood, plastic, glass, wax paper, freezer paper or anything non-porous works well.
- Always print on a hard, flat surface to keep the fabric or paper and the film flush. Glass helps, and you can clip or clamp the fabric or paper and negative between the glass and a board for the sharpest result.
- If your fabric or paper is too wet, blot it with a paper towel or let it dry slightly before placing your negative.
- It's better to overexpose than underexpose. Even if the color looks fully developed, leave your print in the sun for the full suggested time.
- If you mask the edge of your print, remove the tape before placing your image. This makes it easier to smooth out wrinkles in the fabric.
- Stretching the fabric when applying dye and printing can distort the print. Keep fabric taut, but don't stretch it.
- Double up your negative for more density or contrast if your inkjet printer puts down less ink, or feed the film through the printer more than once.
- If printing without film or glass, mist the fabric or paper with water during exposure to keep it wet longer, which may give deeper or brighter colors. A retarder like Jacquard Screen Life also keeps the dye wet longer.