Quick start guide

SolarFast quick start guide

Seven steps from coating to washing, for photograms, photographs, hand-drawn negatives and multi-colored prints.

Download the PDF

Use SolarFast to make photograms, photographs, hand-drawn negatives and multi-colored prints.

Seven steps

  1. Apply SolarFast to fabric or paper. For hard edges, use masking tape.
  2. Blot absorbent paper or fabric with a paper towel to avoid over-wetting.
  3. Place objects or an image on the coated surface. Film negatives should be inkjet-printed on SolarFast Film.
  4. Secure your image with glass, binder clips, pins, tape or magnets.
  5. Expose the coated paper or fabric to sunlight for 10 to 20 minutes.
  6. Take it inside before revealing your image.
  7. Remove the undeveloped dye by washing. Use SolarFast Wash for best results.

Now you're done

Prints are soft to the touch, lightfast and washable.

To turn any image into a negative, visit the Negative Generator.