Instructions
iDye Poly instructions
How to dye polyester and nylon with an iDye Poly packet and Color Intensifier on the stove top, and how to dye blends.
An easy, no-mess soluble dye packet that gives the brightest, most intense colors possible on polyester and nylon fabrics, poly/cotton blends, most plastics and other synthetic materials. Each packet dyes 2 to 3 lb (1 to 1.3 kg) of dry fabric.
iDye Poly isn't odorless, so use it in a well-ventilated area. Not all synthetic fibers are created equal: results vary with the fabric, the dye bath temperature and the dyeing time, so always test first.
Which iDye?
- 100% natural fabrics: use iDye for Natural Fabrics.
- 100% polyester and nylon: use iDye Poly.
- Blends of natural and synthetic fibers: combine similar colors of iDye for Natural Fabrics and iDye Poly.
For best results
- Read all the instructions before you start.
- Use the stove top method for the most intense color.
- Stir constantly for even color.
- For lighter shades, use less dye.
Polyester needs high heat for good color, which is why we always recommend the stove top method. The dye bath won't get hotter than 212°F (100°C), which is safe for most synthetics. Don't try to dye anything that melts at that temperature.
Note: these instructions are for the most intense color. For lighter shades, dissolve the packet in a jar of hot water and pour off just part of the dye for the dye bath. The color deepens the longer the fabric is in the dye bath, and results also vary with the fiber and dye bath temperature. The color on the package is approximate.
Stove top method for 100% polyester and nylon
Note: don't use the utensils or pot for food afterwards.
1. Fill a pot with enough warm water for the fabric to move freely and turn the heat to high.
2. Add the iDye Poly packet and the iDye Color Intensifier to the water and stir until dispersed. Only use the Color Intensifier when dyeing polyester.
3. Add the pre-wetted fabric and bring the dye bath to a rolling boil. Keep it there, stirring frequently, for ½ to 1 hour.
4. Turn off the heat and remove the fabric from the dye bath. Be careful, as the fabric and dye bath will be hot. The dye bath is septic and sewer safe and can be poured down the drain.
5. Rinse, then wash the fabric in cool water with a mild detergent.
Polyester blends
iDye Poly only colors the synthetic part of a blended fabric. If you dye a 50/50 blend, for example, only half the threads take the color, which can give some very interesting effects.
Fabric that's 65% synthetic or more can usually be dyed very well with iDye Poly alone. For total coverage, combine iDye Poly with iDye for Natural Fabrics in the same dye bath: iDye Poly colors the synthetic fibers while iDye for Natural Fabrics colors the natural ones. You can even use two completely different colors at once for a unique two-toned heather effect. After dyeing with both, wash the fabric in cool water.