Troubleshooting
iDye FAQs and troubleshooting
Answers to common questions about iDye for Natural Fabrics and iDye Poly: fibers, pots, dye amounts, shades, bleeding and more.
Download the PDFCan I dye rayon with iDye? How about nylon?
Yes, iDye for Natural Fabrics works great on rayon, which is essentially synthetic cotton. Nylon must be dyed with iDye Poly.
Is it non-toxic?
Used according to the instructions, iDye is safe.
What kind of pots can I use?
Don't use a pot you plan to cook with again. Stainless steel or enameled pots work best. Aluminum pots aren't recommended, but will work in a pinch.
Will a Teflon pot work?
Yes.
What is the dissolvable packet made of?
PVA (polyvinyl alcohol).
Is the dye bath safe for septic tanks?
Yes.
What's the safest, greenest way to dispose of it?
Dispose of it according to local and state regulations.
How much fabric will a packet dye?
Up to 3 lb for deep shades. You can dye much more, but the depth of shade starts to drop.
For darker colors, should I use 2 packets?
It depends on how much fabric and water you're using. You get darker colors by using more heat, less water or more dye.
I'm worried about shrinkage. Do I have to use hot water?
Yes. Many of the dyes are blends of several colors, and each color strikes at a different temperature, with 180°F being optimal. For the best, most accurate color, you need hot water. If your fabric can't take high temperatures, try a cold water dye like Procion MX.
Do I need to add salt or vinegar?
It's not absolutely necessary, but highly recommended for maximum color intensity. Use salt for cellulose fibers (cotton, linen, hemp and so on) and vinegar for protein fibers (silk, wool, feathers and so on). They help drive the dye into the fabric.
Can the colors be mixed together?
Yes.
What if I want a lighter shade?
Use less dye. Dissolve the dye in a jar and use just what you need, saving the rest for next time. You can also cut open the packet and pour out just a pinch of powder. Dyeing at a lower temperature also gives paler colors.
Do I use iDye Fixative with iDye Poly?
No. The fixative is only for iDye for Natural Fabrics, where it improves washfastness.
Can I save the dye bath and reuse it later?
Yes, but it's not recommended. A second dyeing is unlikely to match the first, especially with colors made from several dyes, because each dye in the blend strikes at a different rate and the balance left in the bath changes. If matching color isn't a concern, remember you may need to reheat the dye bath to get the dye back into solution.
Once it's mixed with water, how long does it last?
Indefinitely, but over time the dye falls out of solution, and you'll need heat to dissolve it again.
If unopened, how long will it last?
Indefinitely.
Can I airbrush with iDye?
In theory, but it's not recommended. Jacquard has products better suited to spraying, such as Concentrated Vinyl Sulphon dyes or Dye-Na-Flow. Contact us and we'll recommend one.
How do I tie dye a polyester shirt with iDye Poly?
Use the sublimation method, or apply the dye and then steam above 212°F. You can also tie the fabric and submerge it in the boiling dye bath.
Can I paint on fabric with iDye?
It's possible, but not recommended. Try Jacquard's fabric paints or a cold water dye instead.
What would be the best way to get a very light shade on a 100% polyester dress?
Use just part of the packet. Either pre-dissolve the dye in a jar and pour off a small amount, or cut open the packet and carefully scoop out a little powder.
Will iDye for Natural Fabrics work in a front loading washing machine?
Yes. See the iDye for Natural Fabrics instructions for the front loading washing machine method.
Can I use iDye Poly in the washing machine?
No. iDye Poly needs very high temperatures and should only be used on the stove top.
How do I keep iDye colors from staining the plastic inside my washing machine?
Pre-dissolve the packets before adding the dye to the machine, or run several washes with hot water and bleach after dyeing.
I've finished dyeing in stainless steel pots. If I wash them thoroughly, can I cook with them again?
No. Pots and utensils used for dyeing should never be used for food.
Troubleshooting
The color is bleeding. What did I do wrong?
Maybe nothing. Some colors, like Crimson, tend to bleed. Use iDye Fixative to stop it: it works great for improving the washfastness of any color.
My black came out olive green. What happened?
The dye bath wasn't hot enough. Black needs at least 180°F, and sometimes a longer dyeing time too.
Why doesn't my fabric match the picture on the packet?
The picture is only an approximation. Every fiber gives a slightly different color, and some give dramatically different colors.
Why does iDye Navy look purple in the water?
Our Navy is a very warm, red navy. At low concentrations it dyes purplish, but at high concentrations it's a beautiful warm navy. The red component strikes more slowly than the others, so it needs more red to get the warm navy tone, which makes it look purple in solution. The color of a dye bath is always a little different from the color it gives on fabric.
I dyed a cotton garment with iDye for Natural Fabrics, but the threads stayed white. What happened?
The thread in commercial garments is often polyester, which iDye for Natural Fabrics doesn't color. To dye the thread at the same time, mix the same colors of iDye for Natural Fabrics and iDye Poly in the dye bath and use the stove top method.
I dyed a synthetic garment with iDye Poly and even the buttons changed color. What happened?
iDye Poly colors just about anything synthetic, including plastic buttons.
There's a strong chemical smell on fabric I dyed with iDye Poly. How do I get rid of it?
Wash it several times in hot water with a strong detergent.
I used iDye Color Remover on store-bought jeans for 40 minutes, just below boiling and stirring constantly, and they're the same color. Why?
Not all dyes can be removed. Color Remover works well on iDye colors on natural fabrics, but isn't guaranteed to work on other dyes. Test first.