Instructions

Neopaque instructions

How to apply and heat set Jacquard Neopaque, plus tips for mixing colors, pastels, transparent effects and metallics.

Download the PDF

Read through all the instructions before you begin.

Jacquard Neopaque is easy to use. Right from the start you can make fun, exciting projects, and your range of techniques will grow with your experience. Neopaque also mixes beautifully with Lumiere, Dye-Na-Flow and Textile Color.

Neopaque Flowable Extender is an excellent medium for Pearl Ex Powdered Pigments. Adding Pearl Ex to the other Neopaque colors gives a muted metallic effect, because the paints are opaque.

Application

Apply Neopaque with brushes, stamp pads, squirt bottles or an airbrush. For airbrushing, thin with up to 25% water.

Heat setting

Once dry, Neopaque must be set with heat. There are two ways to do it:

  • Ironing (best): use a dry iron on the reverse side, at the right setting for the fabric.
  • Dryer: run the dryer as hot as the fabric can take for about 35 to 45 minutes.

Clean up

Clean all tools promptly with warm water.

Tips

  • Mixing colors: Neopaque comes in 13 colors, and you can easily mix them to make any color you want.
  • Pastels: mix Neopaque White into any other Neopaque color. Start with a little and add more to increase the effect.
  • More transparency: add Neopaque Flowable Extender. The more you add, the more transparent the color.
  • More transparency and flow: add up to 25% water for more of a watercolor effect.